How to scan Silver decoder for SKY Pacific?

1. Press "Menu" from SKY Pacific remote or decoder.
2. Select “Installation”.
3. Go to “Easy Installation”.
4. Check that you have more than 50% percentage on ‘Signal Strength’ and ‘Signal Quality’.

• If you have a 0% signal, click on this link for a troubleshooting guide.
• https://support-fj.digicelgroup.com/hc/en-us/articles/115013725147-Troubleshooting-SKY-Pacific-Grey-Decoder-

5. If the signal level is OK, Press the “Red” button on the remote to scan.
6. Once scanning has reached 100% progress, press “Menu” again to save and exit.

***Note that scanning can only be done if you have a working SKY Pacific remote.